
Peppermint bark is a snap of dark chocolate under a thicker layer of creamy white chocolate, with crushed candy canes that crunch on top and a cool hit of mint in both layers. It is the candy that fills Christmas tins, and it costs a fraction of the boxed kind.
Whether the two layers stay together comes down to timing. Chill the dark chocolate for only 10 to 15 minutes, until it is set to the touch but not hard, then spread the white chocolate over it so the two fuse into one slab. Melt the white chocolate gently, never above 110°F (43°C). Plan on 30 minutes of work and about 1 hour in the fridge, all in one 9×13-inch (23×33 cm) rimmed pan, for 24 pieces.
At a Glance
- Yield: 24 pieces, about 1 3/4 pounds (800 g) of bark
- Pan: one 9×13-inch rimmed quarter sheet pan lined with parchment
- Time: about 90 minutes, 30 of them hands-on; no oven
- Difficulty: easy, as long as the white chocolate melts slowly
- Key technique: add the second layer while the first is still slightly tacky
The Two Temperatures That Matter
Good bark depends on two numbers. White chocolate is mostly cocoa butter, milk solids and sugar, and the milk solids scorch and clump above about 110°F (43°C). Melted at 50% power in 30-second bursts and stirred between each one, it stays smooth and pourable. Dark chocolate tolerates a little more, up to about 115°F (46°C), but the same slow method keeps it glossy.
The second number is the temperature of the base when the top goes on. Fully set, fridge-cold dark chocolate has a hard, slick surface, and the warm white layer cannot melt into it. The bark then splits into two separate sheets the moment you break it. A base that is just set, still faintly tacky and cool rather than cold, softens slightly where the white chocolate touches it, and the layers bond.
A teaspoon of coconut oil in each layer is optional insurance. It softens the bite just enough that the bark breaks into clean shards instead of shattering, and it makes both chocolates more fluid for spreading thin.
Ingredients Worth Choosing Carefully

- Semisweet or bittersweet chocolate: 12 ounces (340 g), chopped from bars. Chocolate in the 55% to 65% range balances the sweet top; chips work but contain stabilizers and set softer and duller.
- White chocolate: 16 ounces (454 g), from bars that list cocoa butter as an ingredient. White baking chips and candy melts are made with palm oil, so they taste waxy and never fully bond to the dark layer.
- Peppermint extract: 3/4 teaspoon, divided. It is strong; more than 1 teaspoon total tastes like toothpaste. Use extract, never peppermint oil by the same measure, which is about 4 times stronger.
- Candy canes: 6 regular canes, about 1/2 cup (85 g) once crushed. Peppermint starlight mints work the same.
- Coconut oil: 2 teaspoons, divided, optional. Refined coconut oil has no coconut flavor.
Layer One: The Dark Chocolate Base
Line the pan with parchment so it overhangs on two sides; the overhang is your handle for lifting the slab out later. Melt the dark chocolate with 1 teaspoon of coconut oil at 50% power in 30-second bursts, stirring after each, and stop while a few small pieces remain. Stir until they melt from the residual heat, then add 1/4 teaspoon of the peppermint extract.

Pour it into the pan and spread it with an offset spatula into an even layer about 1/8 inch (3 mm) thick, pushing it into the corners. Chill for 10 to 15 minutes. Check at 10: the surface should look matte and feel set when touched lightly, while still leaving a faint fingerprint. If you need a refresher on melting without seizing, see our guide on how to melt chocolate chips; the same rules apply to chopped bars.
Layer Two: White Chocolate and Candy Canes
While the base chills, crush the candy canes in a zip-top bag with a rolling pin until most pieces are 1/8 to 1/4 inch (3 to 6 mm). Shake them in a fine sieve to remove the powdery dust. The dust dissolves into the white chocolate as pink streaks and turns sticky in the tin, while the larger pieces stay crisp.
Melt the white chocolate with the remaining coconut oil the same way, in 30-second bursts at 50% power, and stir in the remaining 1/2 teaspoon of extract. It should flow off the spoon in a thick ribbon. Pour it over the tacky base and spread it quickly toward the edges in a layer about 3/16 inch (5 mm) thick.

Scatter the crushed candy canes over the top straight away and press them in lightly with your palm through a sheet of parchment. Pieces that sit on top instead of in the chocolate fall off as soon as the bark is broken.
How to Tell It Is Set
Chill the pan for 45 minutes to 1 hour, until the bark is firm all the way through and the pan bottom feels cold. A corner pressed with a fingertip should not dent, and the parchment should peel away cleanly when you lift the slab. If the center flexes, give it 15 minutes more.
Let the slab sit at room temperature for 5 minutes before breaking it. Straight from the fridge it shatters into crumbs; slightly warmer, it breaks into large jagged shards with both layers intact. For neat squares for a cookie tray, cut it instead with a chef’s knife warmed under hot water and wiped dry, pressing straight down in one motion.
Fixes for Common Peppermint Bark Problems
| Problem | Cause | Fix |
|---|---|---|
| Layers separate when broken | Dark layer chilled too long or too cold | Add the white layer when the base is set but still tacky, 10 to 15 minutes |
| White chocolate thick and grainy | Overheated or a drop of water got in | Melt at 50% power, under 110°F (43°C); keep bowls and spatulas dry |
| Pink, sticky streaks on top | Candy cane dust melted into the chocolate | Sift out the fine dust before sprinkling |
| Candy canes fall off | Sprinkled on chocolate that had begun to set | Sprinkle right after spreading and press them in |
| Bark shatters into crumbs | Broken straight from the fridge | Rest 5 minutes at room temperature first |
| Dull, streaky surface | Chocolate overheated or chips used | Use chopped bars and melt slowly |
Swaps and Variations
- Milk chocolate base: softer and sweeter; keep the base just as thin so the bark still snaps.
- Triple layer: spread half the white chocolate, then a thin dark layer, then the rest of the white for a striped edge. Chill 10 minutes between layers.
- Swirled: drop spoonfuls of the remaining dark chocolate over the wet white layer and drag a skewer through it once or twice.
- Crushed Oreos: replace half the candy canes with 4 chopped cookies for a cookies and cream version.
- Dairy-free: use a dairy-free dark chocolate and a dairy-free white chocolate bar made with cocoa butter.
If you love the flavor but want something creamier, our peppermint bark cheesecake bars layer the same dark and white chocolate over a cheesecake filling, and chocolate peppermint cookies fill the same tins.
Storing and Gifting Peppermint Bark
Store the bark airtight at cool room temperature, below 70°F (21°C), for up to 2 weeks, with parchment between the layers. In a warm kitchen, keep it in the fridge for up to 3 weeks and take it out 10 minutes before serving. Freeze it for up to 2 months, then thaw it in the closed container so condensation forms on the box rather than on the candy canes, which turn sticky when they get damp.

For gifts, pack it into a tin lined with parchment, about 8 to 10 shards per tin. It travels well in cold weather and stays crisp for the 2 weeks, so you can make a batch in early December and hand it out until Christmas.
Peppermint Bark Questions
Why did my peppermint bark separate?
The dark layer was too cold and hard when the white went on. Pour the second layer after 10 to 15 minutes of chilling, while the base is still slightly tacky.
Do I need to temper the chocolate?
No. Untempered bark is softer and should be kept cool, but melting slowly at low power keeps it glossy enough for gifting.
Can I use chocolate chips?
Yes for the dark layer, though it sets a little softer. For the white layer, use bars made with cocoa butter; white chips rarely melt smoothly.
How far ahead can I make it?
Up to 2 weeks ahead at cool room temperature, or up to 2 months in the freezer.
More Christmas Candy for the Same Tin
Peppermint bark sits well next to a square of white chocolate peppermint fudge, a few pieces of Christmas cracker toffee and a handful of Christmas puppy chow. For a fruitier bark, try the chocolate cranberry bark, and browse our easy Christmas desserts for the rest of the cookie tray.

Peppermint Bark

Made it? Tap the stars to rate it.
Peppermint bark with a thin dark chocolate base, a creamy white chocolate top and crushed candy canes pressed in, with peppermint extract in both layers. The trick is timing: chill the dark layer only 10 to 15 minutes, until set but still tacky, so the white chocolate fuses to it and the bark breaks into shards without splitting. Melt the white chocolate at 50% power and keep it under 110°F so it stays smooth. Four ingredients, no oven, one 9x13 pan and 24 pieces for Christmas gift tins and cookie trays.
Ingredients
Dark chocolate layer
- 12 oz (340 g) semisweet or bittersweet chocolate, finely chopped
- 1 teaspoon refined coconut oil (optional)
- 1/4 teaspoon peppermint extract
White chocolate layer
- 16 oz (454 g) white chocolate made with cocoa butter, finely chopped
- 1 teaspoon refined coconut oil (optional)
- 1/2 teaspoon peppermint extract
Topping
- 6 regular candy canes (about 1/2 cup / 85 g crushed)
Instructions
- PREP: Line a 9x13-inch rimmed pan with parchment, leaving an overhang on two sides.
- DARK LAYER: Microwave the dark chocolate with 1 teaspoon coconut oil at 50% power in 30-second bursts, stirring between, until almost melted. Stir until smooth and add 1/4 teaspoon peppermint extract.
- SPREAD: Spread it into the pan about 1/8 inch thick. Chill 10 to 15 minutes, until set but still slightly tacky.
- CANDY CANES: Crush the candy canes in a bag with a rolling pin and sift out the fine dust.
- WHITE LAYER: Melt the white chocolate with the remaining coconut oil the same way, keeping it under 110°F (43°C). Stir in 1/2 teaspoon peppermint extract.
- LAYER: Spread the white chocolate over the dark layer, then sprinkle the candy canes over it and press them in lightly.
- CHILL: Refrigerate 45 minutes to 1 hour, until firm.
- BREAK: Let the slab sit 5 minutes at room temperature, then break it into about 24 pieces or cut it with a warm knife.
Notes
- Chill the dark layer only 10 to 15 minutes, until set but still tacky, so the layers bond.
- Melt the white chocolate at 50% power in 30-second bursts and keep it under 110°F (43°C).
- Sift the fine candy cane dust out before sprinkling so the top does not turn pink and sticky.
- Rest the set slab 5 minutes at room temperature before breaking so it does not shatter.
- Store airtight below 70°F for 2 weeks, in the fridge for 3 weeks or frozen for 2 months.
Nutrition Information:
Yield:
24Serving Size:
1Amount Per Serving: Calories: 187Total Fat: 11gSaturated Fat: 7gTrans Fat: 0gUnsaturated Fat: 4gCholesterol: 4mgSodium: 19mgCarbohydrates: 24gFiber: 1gSugar: 22gProtein: 3g
Read next
Christmas Dump Cake – Easy Holiday Dessert With Cherry, Pineapple, And Cake Mix
Eggnog Truffles Easy – Rich Holiday Truffles Coated in Dark Chocolate
Creamy Candy Cane Pie – Easy No Bake Christmas Dessert
Old-Fashioned Fruitcake Cookies
Sugar Cookie Cheesecake Recipe with a Buttery Cookie Crust
Christmas Fruit Cake Recipe – Traditional Holiday Cake With Dried Fruit

★ Made it? Tap the stars to rate it